Pipeweld 101T-1
Typical Charpy V-Notch Properties
As Welded | |
Impact Value | 52 ft-lb |
Impact Value | 70 J |
Shielding Gas | M21 Shielding gas |
Testing Temperature | -40 °F |
Testing Temperature | -40 °C |
Typical Tensile Properties
Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
As Welded | 25 % | M21 Shielding gas | 709 MPa (103 ksi) | 654 MPa (95 ksi) |
Deposition Data
Current | Deposition Rate | Diameter | TTW Dist. | Voltage | Wire Feed Speed |
100-300 A | 1.3-5.8 kg/h (2.9-12.8 lb/h) | 1.2 mm (.045 in.) | 21-32 V | 3.2-14.5 m/min (1.3-5.7 in./min) | |
205-230 A | 1.2 mm (.045 in.) | 12.7-19 mm (1/2-3/4 in.) | 25-27 V | 660-965 cm/min (260-380 in./min) | |
135-205 A | 1.2 mm (.045 in.) | 9.5-12.7 mm (3/8-1/2 in.) | 23-26 V | 381-660 cm/min (150-260 in./min) | |
230-265 A | 1.2 mm (.045 in.) | 19-25.4 mm (3/4-1 in.) | 26-30 V | 965-1321 cm/min (380-520 in./min) |
Classifications
Weld Metal |
SFA/AWS A5.29 : E101T1-G EN ISO 18276-A : T 62 4 Mn1Ni P M21 2 H5 |
Consumable Characteristics
Alloy Type | Low alloy |
Welding Current | DC+ |
Typical Weld Metal Analysis %
Typical Weld Metal Analysis % | ||||||||||||||
C | Mn | Mo | Ni | Si | ||||||||||
M21 Shielding gas | ||||||||||||||
- | 1.54 % | 0.15 % | 0.97 % | - | ||||||||||
M21 shielding gas | ||||||||||||||
0.06 % | - | - | - | 0.40 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.